How To Install Encore N150 Mini USB Drivers On Windows 10
How to Install Encore N150 Mini USB Drivers on Windows 10
If you are looking for a wireless adapter that can provide you a better wireless signal, comply with 802.11n standards, and interoperate with all the 11 Mbps wireless products, you might want to consider the Encore N150 Mini USB Adapter. This adapter is easy to install and use, and it comes with one external antenna that can improve your wireless range and coverage. In this article, we will show you how to install Encore N150 Mini USB drivers on Windows 10.
How to Install Encore N150 Mini USB Drivers on Windows 10
Step 1: Download the driver file
The first step is to download the driver file from the official website of Encore Electronics. You can find the link in the reference section below. The file name is ENUWI-1XN59.zip and it is about 16 MB in size. Save it to a location where you can easily access it later.
Step 2: Extract the driver file
The next step is to extract the driver file using a program like WinZip or WinRAR. You can right-click on the zip file and choose Extract All or Extract Here depending on your preference. You will see a folder named ENUWI-1XN59 that contains several files and subfolders.
Step 3: Plug in the adapter
The third step is to plug in the adapter to an available USB port on your computer. Windows 10 will automatically detect the device and try to install the driver for it. However, it may not be able to find the correct driver or it may install a generic driver that does not work properly. To avoid this, you need to manually update the driver using the file you downloaded and extracted.
Step 4: Update the driver
The fourth step is to update the driver using the Device Manager. You can access the Device Manager by right-clicking on the Start menu and choosing Device Manager or by typing devmgmt.msc in the Run box. You will see a list of devices connected to your computer. Look for a device named Network adapters and expand it. You should see an item named 802.11n Wireless LAN Card or something similar with a yellow exclamation mark next to it. This indicates that there is a problem with the driver.
Right-click on this item and choose Update driver. A window will pop up asking you how you want to search for drivers. Choose Browse my computer for driver software. Then click on Browse and navigate to the folder where you extracted the driver file. Make sure to check the box that says Include subfolders. Click on Next and wait for Windows to install the driver.
Step 5: Restart your computer
The final step is to restart your computer for the changes to take effect. After rebooting, you should be able to use your Encore N150 Mini USB Adapter without any issues. You can check your wireless connection status by clicking on the network icon on the taskbar. You can also use the utility that comes with the adapter to scan for available networks, save preferred networks, and adjust other settings.
Conclusion
In this article, we showed you how to install Encore N150 Mini USB drivers on Windows 10 using a simple five-step process. We hope this guide was helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below.
References
: Wireless N150 USB Adapter - Encore Electronics Inc.
04f6b60f66